LED floodlights are mostly used in warehouses and commercial entities. But recently, outdoor LED floodlights have emerged as a good alternative to incandescent floodlights, and hence are being replaced due to their many technological benefits. But when you buy outdoor flood light fixtures, you need to know a little about their installation process. So here are some of the best tips that will help you with a smooth installation of outdoor LED floodlights.
Connect Power Before Installing the Floodlights
It is important that you make a power connection before the installation starts because if you connect the power after the installation, you may realize that you positioned the light wrongly, which means that your target will not be met as you wished. It may also be that the wiring was done inappropriately. Hence, make sure that after you buy outdoor flood light fixtures, connect power before you start the actual installation process since it will ensure that everything is up to the mark during the installation.
Ensure proper Placement of the Floodlights
The best places outdoor LED floodlights are known to light are the corners of buildings and areas close to the roof. If you install it too close to the grounds, it will not provide light to a wide area for your facility. However, installing them close to the ground is easier. Installing them in the corners is the favorite pattern of wrongdoers since they are usually left darkened.
Know the Limits and Seek for Assistance When Required
Installing LED floodlights in most commercial applications may not work well for those who fear heights. Most installation processes require ladders to complete. But if you can access the roof, you can install them from the roof. Usually, a simple ladder may not be adequate to do the job well. Hence, you can use an extension ladder that can lengthen up to at least 20 feet or even more. However, this depends on the size of your building.
Also, ensure that the ladder is set on an even ground and can be locked in place to ensure it is firm and cannot move. If you want extra stability, you can always get help. If you are afraid of heights and lack confidence, hiring someone to install the LED floodlights on your behalf is good. This could be a fast, easy, and cheap installation solution since the experts have the necessary skills to install the lights properly.
Know the Electric Current
Most LED products usually have a low-energy draw, so issues with circuit breakers are rare when installing LED outdoor floodlights. However, if you have several of them and want to connect many LED lights, there might be issues, especially if there are incandescent lights since they draw more power than LED. Hence, there is a potential to destroy and overload the LED lighting. So ensure that the incandescent lights and LED are run out in separate outlets.
Ensure Safety Before Sealing
Lastly, before finalizing your project, test the functionality of the floodlights to ensure that other features like motion detection are running properly. Once you finalize the installation process, it can be difficult to adjust the electrical wiring later.
Conclusion
Following the above steps will help your installation project run smoothly. So ensure you take care of these things and follow the above tips when installing outdoor LED floodlights.
Featured Image Source: https://media.istockphoto.com/id/1169858666/photo/motion-sensor-flood-light-on-white-home-siding.webp?b=1&s=612×612&w=0&k=20&c=1xi1EnTGiV8-8C2S27sJbykTpUgiASwf48EpuTJUW6s=